Guide to Adjusting Sensitivity for Valorant Operation Energy Action How to Adjust Sensitivity for Valorant Operation Energy Action

As a very fast-paced shooting game, in Valorant Energy Action, because it uses mobile operation, there is a higher requirement for sensitivity. To help new players get started quickly, what the author brings today is a guide to adjusting sensitivity in Valorant Energy Action. After reading this, everyone will have a deeper understanding of how to adjust the sensitivity in this game.

Firstly, everyone needs to be clear that this mobile game places more emphasis on headshots during gameplay, so the requirement for positioning is quite high. Since everyone's operational habits differ, it is necessary to have a set of sensitivities that suit you. When shooting, this game uses random bullet trajectories, and during continuous shooting, bullets will move left and right due to the trajectory mechanism, making it unsuitable for suppressing fire at medium to long ranges.

When adjusting sensitivity, first enter the training ground, stand at the center of the screen, and swipe your finger left and right. The best adjustment is when you can just target the robots on the far left and right. If you overshoot, it means the sensitivity is too high and needs to be reduced; if you cannot reach, then it needs to be increased. You can also choose to aim at the middle pillar in the range with the crosshair, slide your finger from the position of the pillar to the far right of the screen, and see if the view can turn 180 degrees, using this to adjust the sliding screen sensitivity. Move up and down along the edge of the board on the wall of the range, and adjust the vertical sensitivity based on whether each swipe exceeds the edge.

In the game, another important setting is the gyroscope sensitivity. After turning on the gyroscope, directly pull the turning sensitivity below 50. Use the gyroscope to aim, and if you can just hit the target, that's the appropriate value. If you overshoot, reduce the gyroscope sensitivity a bit; if you cannot reach, increase it slightly. The manual sensitivity and gyroscope sensitivity after aiming can be directly reduced to half of the hip-fire sensitivity. Then, in the training camp, shoot targets and make further fine adjustments until you find the most comfortable settings for yourself.

Hopefully, the guide to adjusting sensitivity in Valorant Energy Action brought by the author today can help everyone quickly find the most suitable sensitivity values for themselves. It's important to note that this game is quite unique, and simply copying other players' values will not necessarily lead to good performance; it must be the one that suits you best.